Summary of the key points of the installation details of the sun panel in the greenhouse

 Sunshine board (PC board), also known as ring steel, is a material for high-quality plastic products. Due to its many advantages, it is widely used in agricultural production. Today Plastic Sheet manufacturers introduce the details and specifications of their installation on the top of the glass greenhouse and the top of the solar panel greenhouse.

First of all, we need to understand that the solar panel for agricultural production is installed on the triangular surface on the top of the glass Greenhouse. It has a certain slope on the top. Rain, snow and dust falling on it will fall into the tank along the slope. Therefore, we need to pay attention to the following items when installing

1. The front and back of the sun panel

  Because the solar panel is used on the greenhouse, it will take into account the problems of externally resisting ultraviolet rays and internally dripping and defogging. In order to solve these two problems, the agricultural greenhouse solar panel will add a layer of anti-ultraviolet UV coating on the front side during production, which greatly prolongs the service life of the solar panel. The inner surface of the agricultural sun board is also added a layer of coating to allow water to flow into the dew collecting tank along the slope of the sun board. The function of this coating is to drip and defog. Therefore, when installing, keep in mind that the front side of the solar panel is upward, otherwise it will seriously affect the service life of the solar panel.

2. The length and width of the sun panel

In consideration of its light transmittance, the greenhouse solar panels for agriculture generally use 8mm double-layer hollow panels, and the light transmittance is about 80%. The composition of agricultural to solar panels is arranged in long strips. In normal installation, the strip direction is the length of the solar panel, and the direction in which the strips are arranged is the width of the solar panel. Therefore, when we customize agricultural sun panels, the commonly used model is 1.95m as the width, and the length is customized according to the length measurement of the purlins in the agricultural greenhouse. The length and width of solar panels in agricultural greenhouses affect their curvature, load and lifespan.

3. The edge of the sun panel is wrapped

Above we know that the double-layer hollow solar panel used in agriculture is composed of long strips, and the top and bottom of each strip are the same. We need to wrap the holes at both ends of the solar panel with aluminum foil paper tape before installing the panel. In this way, a closed space is formed inside the strip, and external dust and water vapor will not go inside. If the installer omits this process, the interior of the solar panel will be easily dirty in the later stage, and the interior cannot be cleaned, which will seriously affect the light transmittance and service life of the solar panel.

4.

The installation of polycarbonate sheet uses neutral silicone glue, which will not cause corrosion to the sheet. Long service life and good sealing performance.

The installation of professional agricultural glass greenhouse sunlight panels requires a professional construction team.